Primus OmniLite Ti Silencer
Currently Unavailable View Product
Compare (0)
Featured Reviews
Most Helpful Positive Review OmniLite Ti Silencer--GREAT!
This silencer for the OmnLite Ti Backpacking Stove muffles the noise of the bell shaped burner. Works great with canister gas and Coleman fuel.
All Reviews
Show
Sort by
Filter by

Primus OmniLite Ti Silencer Cap

by CDT, from CA, United States Written on January 21, 2024
I've had my OmniLite Ti for about two years and used a 3rd party silent cap during that time. That cap was fine, but was rather heavy and depended upon a heat-generated interference fit to remain secure in the burner bell. From time to time the cap would separate from the burner bell and need to be reset; not a major issue, but somewhat tedious. Recently, I decided to give the Primus cap a try which comes securely mounted in a dedicated burner bell which screws onto the stove's burner base in place of the stove's original burner bell. It is worth noting that the original burner bell is vented to allow for combustion between the stove jet and the base of the flame plate (which is removed and set aside when using the 3rd party silent cap). The Primus burner bell and silent cap combination is not vented. This may help reduce the possibility of under-burn which could damage the cap (and to which the 3rd party cap may be more be more susceptible). That having been said, priming the stove seems to take marginally longer (and more fuel) with the Primus cap than when using the 3rd party arrangement. I suspect this is because the venting in the original burner bell allows the priming flame to have access to the inside of the burner bell and bottom of the silent cap which aids in vaporizing the the liquid fuel (white gas in my case). On balance, the Primus silent cap is a step forward. I am pleased with its performance and will continue to use it.
Pros:
  • Cap is securely mounted and reasonably light weight
Cons:
  • May take marginally longer/ more fuel to prime
Would recommend: Yes
Was it helpful to you? Yes | No

Less likely to get complaint in the morning

by W., Verified Owner from OR, United States Written on June 27, 2018
This is an add-on for Primus OmniLite Ti Stove. The origin triangular plate at the burner head (commonly used in white gas stove) makes the stove very noisy. This part will not make burning totally silence but you can feel the difference. In my feeling, the power will slightly decrease when using the silencer. Make sure it is screwed properly on the stove.
Would recommend: Yes
1 of 1 found the following review helpful.
Was it helpful to you? Yes | No

recommend for someone who likes outdoor activities

by GUNWOO LEE, Verified Owner from Korea, Republic of Written on September 12, 2017
it was really nice and great to use outside.
shipping lead time and total value was reasonable.
i have another item manufactured by Primus.
and i think Primus is good manufacturer of item for camping activity.

you will like this item for sure.
Would recommend: Yes
1 of 4 found the following review helpful.
Was it helpful to you? Yes | No

It's good to have the

by Hong A., Verified Owner from CA, United States Written on August 10, 2017
It's good to have the performance I expected.
Would recommend: Yes
0 of 2 found the following review helpful.
Was it helpful to you? Yes | No
There are no reviews that match your criteria. Would you like to review this product?
Last updated 2025-11-12 UTC.